-
04- 05
GLASS SILKSCREEN PRINTING FROM 1MM TO 2500MM SIZE
Silk Screen printing is the most common printing solution for glass components. It’s the standard method for high volume glass printing. The screen printing process uses a stencil to apply the print design to the glass surface by spreading ink across a mesh screen. The glass is then fired to adhere the ink to the glass surface. The in-house screen printing capabilities from Zhentian Optical Glass Technology has the most advanced silk screen printing technology, along with experienced operators and up-to-date equipment, we are able to handle just about any printing needs, print up to 10 colors or more. But of course, the more colors required , the more expensive cost is. Our glass printing capabilities including: Standard colors printing – black, silver White color printing Custom color matching printing Edge printing Etching and Bus Bars-such as silver epoxy or conductive ink printed on an ITO or IMITO LARGE SIZE SCREEN PRINTING Zhentian Optical Glass Technology in-house silk printing capabilities are able to print large size glass panel, maximum size up to 2500mm (110 inches) The whole printing process are completed from 1000 class clean room to reduce the failure rate. ZHENTIAN IN-HOUSE PRINTING ARE ABLE TO PRINT VARIOUS SIZES BlackSilver – standard colors Custom colors available Higher durability and more scratch resistant Can print as fine as 0.15 mm Thickness Requirements <0.051mm [<0.002”] Single Pass: 10-60 μm
-
04- 05
MAGNETRON SPUTTERING, MAGNETRON SPUTTER COATER
Magnetron Sputtering Machines– Vacuum Plasma Coating. Magnetron sputter coater is used to apply thin coatings on glass or silicon for research purposes. The magnetron sputtering equipment costs thirty millions RMB, it’s fully automatic system controlled by touch control panel. Magnetron sputtering is allegedly to be the most advanced glass coating technology, features of high speed, low temperature, low damage, Magnetron sputtering deposition is a fast technique for applying a thin layer of inorganic materials on a substrate, such as ITO or metallic contacts. The magnetron ionizes argon gas which then accelerates towards the cathode where the target materials is located. The stream of argon ions erodes away the target material making a charged cloud which then deposits on the substrate located at the anode. Magnetron sputteringis very versatile and used to coating entire glass surfaces because it is difficult to control where the material go precisely.Adhesion is excellent. By introduced the advanced magnetron sputtering technology and fully automatic equipment, we are more capable to provide Highly Customized Glass Coating Solutions, along with 1000 Class clean room, Zhentian Optical Glass are more than qualified to provide the glass solution from start to complete for you. We always cares about your project. Call us today，and we telling you we are different. Anti-Reflection Coating Glass– AR Coating Glass Anti-reflection coatings reduce first surface reflection losses, improve contrast and boost the transmission through the glass optical surface. We are more than happy to work with you to identify the optimum design of your glass components and coating solutions.The magnetron sputtering technology from Zhentian equipped by fully automatic system, and 1000 class cleanroom will double assure a ultra highly adhesion of the AR coating on glass surface and reduce the cost. APPLICATIONS AND INDUSTRIES Zhentian Optical Glass Technology provide one-stop glass solution from prototype to large or small volume mass production, we will be more than happy to work side-by-side with you every step of the way. Some of the industries that we serve are automotive, energy, architecture, lighting, medical, aviation, marine, education, commercial and many more.Available applications for AR coating glass include, but are not limited to: Camera Lens Elements Solar Cells Ophthalmic (corrective) lenses Microelectronic Photolithography Microscopes Telescopes Binoculars and More
-
04- 05
One of the key reason of success for Zhentian Optical Glass Technology is we start with the basics and keep a constant eye on QUALITY IS PRIORITY.
From one prototype, small quantities order to large volume mass production, every pieces of glass have to pass through each extensive levels of quality assurance and control. We aim to 100% inspection for each order.glass components are made from class 1000 clean room ( ISO Class 6) and cleaned by ultrasonic cleaning bath. The complete quality management system including raw material inspection, quality assurance during each production procedure, first-piece inspection, random sampling and final checks just before shipment.
-
04- 07
LASER CUTTING AND STRENGTHENED GLASS
Laser Cutting Display and Strengthened Glass and Glass Substrates
Zhentian Optical Glass Technology are able to offer laser cutting processes employ ultra-short laser pulses in the picosecond range that cut glass, utilizing nonlinear processes. This ensures a low as cut edge roughness, increased cut bend strength, and a higher throughput. Laser glass cutting technology from Zhentian Optical Glass Company thus enables superb as cut quality, maximum output and yield in high volume production of touchscreen displays for special shape display equipments, industry and commercial products, automotive instruments, central console and consumer products.
Shenzhen Zhentian Optical Glass Co., Ltd. © All Rights Reserved.
